VE883T
Last updated
Last updated
Extends HDMI video, stereo audio, IR, RS-232 control, and Ethernet signals over duplex fiber optic cabling
Applies duplex fiber optic cables to connect the transmitter and the receiver
Supports ultra long distance transmission up to 10 km*
HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant
Supports lossless 4K video up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0) FarSmooth – ATEN’s exclusive
FarSmooth technology prevents lagging and freezing by matching the output rates to the input rates and ensures the video display is stable, smooth and identical to the source, particularly in long-distance extension applications where uninterrupted video streams are required.
Supports Gigabit Ethernet Channel
Supports USB 2.0, with a maximal transfer rate of 25MByte/s
Bi-directional IR signal transmission – IR transmission is processed one direction at a time, ranged from 30 kHz to 56 kHz
Features RS-232 serial port for connecting peripherals such as touch screens, and barcode scanners
Supports batch upgrades using Firmware Upgrade Utility
Built-in 8 kV / 15 kV ESD protection
Plug-and-play
Hot-pluggable
Rack-mountable
Note:
. The maximum transmission distance may vary depending on the fiber type, bandwidth, connector splicing, losses, model, chromatic dispersion, environmental factor, and kinks.
. For long distance transmissions, ATEN recommends using SFP+ modules to allow compatibility with single or multi mode fibers. Depending on the chosen package (VE883TK1 or VE883TK2), different SFP+ modules are supplied:
. VE883TK1: 10 Gbps/300m SFP+ Duplex Multi Mode Transceiver
. VE883TK2: 10 Gbps/10 km SFP+ Duplex Single Mode Transceiver
. ATEN recommends using Single Mode fibers that conform to IEC 11801 (OS1, OS1a, OS2), and Multi Mode fibers that conform to IEC 11801 (OM3, OM4) specifications.
. The Device is class 1 laser product. It meets the safety regulations of IEC/EN 60825-1, 21 CFR 1040.10, and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Note 1. Operating distance is approximate. A typical maximum distance may vary depending on factors such as fiber type, bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
2. It is recommended that you use Single Mode fibers that conforms to IEC 60793- 2-50 B1.1 or ITU-T G.652.B specifications; Use Multi Mode fibers that conform to IEC 11801 (OM3) specifications.
3. The Device is class 1 laser product. It meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Video Input
Interfaces
1 x HDMI Type A Female (Black)
Impedance
100 Ω
Max. Distance
Up to 5 m
Video
Max. Data Rate
10.2 Gbps (3.4 Gbps Per Lane)
Max. Pixel Clock
340 MHz
Compliance
HDMI (3D, Deep Color, 4K) HDCP 2.2 Compatible
Max. Resolution
4096x2160/3840x2160@60Hz (4:2:0); 4096x2160/3840x2160@30Hz (4:4:4)
Max. Distance
1 x SFP Module (*Note) VE883TK1: up to 300m (MM, OM3, Black) VE883TK2: up to 10km (SM, Blue)
Audio
Input
1 x Terminal Block, 5 pole (Green)
Output
N/A
Connectors
Unit To Unit
1 x bi-directional SFP (LC)
Firmware Upgrade
1 x Micro USB (Type B) Female (Black)
Power
1 x DC Jack with locking
Fiber Optics
Data Rate
10.3 Gbps
Wavelength
VE883TK1: 850 nm VE883TK2: 1310 nm
Fiber Type
VE883TK1: Multimode(MM), OM3, LC Duplex Type VE883TK2: Singlemode(SM), LC Duplex Type
Control
USB Channel
1 x USB Type B Female (White)
RS-232 Channel
1 x Terminal Block, 3 pole (Green)
IR Channel
1 x Mini Stereo Jack Female (Black); 30~56 KHz full range transmission
Ethernet Channel
1 x RJ45 Female
LEDs
Power
1 (Green)
Link
1 (Orange)
Video Output
N/A
Power Consumption
DC5V:7.05W:33BTU
Environmental
Operating Temperature
0-40°C
Storage Temperature
-20 - 60°C
Humidity
0 - 80% RH, Non-Condensing
Physical Properties
Housing
Metal
Weight
0.64 kg ( 1.41 lb )
Dimensions (L x W x H) with bracket
19.94 x 14.69 x 3.00 cm (7.85 x 5.78 x 1.18 in.)
Dimensions (L x W x H) without bracket
16.60 x 12.49 x 2.90 cm (6.54 x 4.92 x 1.14 in.)
Carton Lot
5 pcs
