CS1822
Last updated
Last updated
One USB keyboard/mouse and one HDMI monitor control two computers and share two USB peripherals
Supports superior video quality – 4K UHD (3840 x 2160 @ 60Hz) and 4K DCI (4096 x 2160 @ 60Hz)
Video DynaSync™ – an exclusive ATEN technology that eliminates boot-up display problems and optimizes the resolution when switching among different sources
Built-in 2-Port USB 3.1 Gen 1 hub with SuperSpeed 5 Gbps data transfer rates
Audio Mixer Modes – mixes up to two audio sources as audio output
Computer selection via pushbuttons, hotkeys, mouse1, and RS-232 commands
ATEN default EDID mode – smooth power-up, high-quality display and resolution optimization to eliminate compatibility issue
Independent switching of KVM, USB peripheral, and stereo audio focus2
HDMI 2.0 compliant; HDCP 2.2 compliant
Supports HD Audio2
Power on detection
Auto Scan Mode for monitoring all computers
Firmware upgradable
Note:
Mouse port switching is only supported under mouse emulation mode and by USB 3-key wheel mice.
HD audio through HDMI channel cannot be switched independently
Computer Connections
2
Port Selection
Hotkey, Pushbutton, Mouse, RS-232 Commands
Connectors
Console Ports
2 x USB Type A Female
1 x HDMI Female (Black)
2 x 3.5mm Audio Jack Female (Green; 1 x front, 1 x rear)
KVM (Computer) Ports
2 x USB3.1 Gen1 Type B Female (Blue)
2 x HDMI Female (Black)
2 x 3.5mm Audio Jack Female (Green)
Serial
1 x RJ-11 Female
Power
1 x DC Jack
USB Hub
2 x USB3.1 Gen1 Type A Female (Blue; 1 x front; 1 x rear)
Switches
Selected
2 x Pushbutton
LEDs
On Line /Selected
2 (Orange)
USB Link
2 (Green)
Audio
2 (Green)
Emulation
Keyboard / Mouse
USB
Video
4096 x 2160 @ 60Hz
Scan Interval
1-99 Seconds (Default: 5 sec.)
Power Consumption
DC5V:1.78W:50.97BTU
Environmental
Operating Temperature
0-40°C
Storage Temperature
-20-60°C
Humidity
0-80% RH, Non-condensing
Physical Properties
Housing
Metal, Plastic
Weight
0.74 kg ( 1.63 lb )
Dimensions (L x W x H)
21.00 x 8.80 x 5.55 cm
(8.27 x 3.46 x 2.19 in.)
Note :For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
