KA7171AK

USB-PS/2 KVM Adapter Module with Local Console and Access Control Box Kit

KA7171AK

Features

• Compatible with ATEN 2XRT-0015G KVM over IP Access Control Box to grant users at the local console full control of access to servers

• Cat 5e/6 cable connects the device and KVM switch

• Supports computers with PS/2 or USB keyboards and mice

• Local console operation - control your system from the extended USB keyboard, USB mouse, and monitor via local console

• Pushbutton operating mode selection for privileged console control

• Built-in ASIC for greater reliability and compatibility

• USB overcurrent detection and prevention

• Built-in ESD protection and surge protection

• Superior video quality - supports resolution up to 1920 x 1200 (Reduced blanking)*

• Supports VGA , SVGA , SXGA , UXGA , WUXGA and multisyncmonitors; local monitor supports DDC; DDC2; DDC2B

• Easy to install – no software required - connecting cables to the devices is all it takes * This maximum resolution may vary depending on the transmission distance. For more details, please refer to the product pages of the connected KVM switches.

Diagram

Specifications

Connectors
Console Ports	2 x USB Type A Female (White) 1 x HDB-15 Female (Blue)
KVM Ports	1 x SPHD-18 Female (Yellow)
Power	1 x DC Jack (Black)
USB Port	1 x USB Type A Female (White)
Control	1 x PS/2 1 x RJ-11 Female (Reserved)
RS-232	1 x DB-9 Male (Reserved) 1 x DB-9 Female (Reserved)
Pushbuttons
Operating Mode Selection	1 x Pushbutton
LEDs
Local	1 (Green)
Remote	1 (Green)
Emulation
Keyboard / Mouse	PS/2, USB
Video	Up to 1920 x 1200 @ 60Hz; DDC2B
Power Consumption	DC5.3V:1.96W:16BTU
Environmental
Operating Temperature	0 - 50°C
Storage Temperature	-20 - 60°C
Humidity	0–80% RH, Non-condensing
Physical Properties
Housing	Metal
Weight	0.49 kg ( 1.08 lb )
Dimensions (L x W x H)	20.30 x 8.64 x 2.50 cm (7.99 x 3.4 x 0.98 in.)

Note：For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.