KA7174
Last updated
Last updated
Compatible with ATEN 2XRT-0015G KVM over IP Access Control Box to initiate local-only access and control to the servers
Cat 5e / 6 cable connects the device and KVM switch
Supports computers with PS/2 and USB keyboards and mice, controlling the system from these extended devices and monitor via local console
Supports custom RS-232 touch panel from both local and remote sites
Pushbutton operating mode selection for privileged console control with OSD tag notifications indicating denial of access to the local or remote users when configured as such
Built-in ASIC for greater stability and compatibility
USB over-current detection and prevention
Built-in ESD protection and surge protection
Superior video quality – supports resolution up to 1920 x 1200 (reduced blanking)*
Supports VGA , SVGA , SXGA , UXGA , WUXGA, and multisync monitors; local monitor supports DDC, DDC2, and DDC2B
Easy to install – no software required – simply connect cables to the devices * This maximum resolution may vary depending on the transmission distance. For more details, please refer to the product pages of the connected KVM switches.
Note: For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
Connectors
Console Ports
1 x SPHD Male (Yellow)
KVM Ports
1 x SPHD Female (Yellow)
Power
1 x DC Jack (Black)
Control
1 x 6-pin Mini-DIN Female (Purple) 1 x RJ-11 Female + 1 x USB Type A Female (Black)
RS-232
1 x DB-9 Male (Black) 1 x DB-9 Female (Black)
Link
1 x RJ-45 Female (Black)
Pushbuttons
Operating Mode Selection
1 x Pushbutton
LEDs
Local
1 (Green)
Remote
1 (Green)
Emulation
Keyboard / Mouse
PS/2, USB
Video
Up to 1920 x 1200 @ 60Hz
Power Consumption
DC5V:1.57W:30BTU
Environmental
Operating Temperature
0 - 50°C
Storage Temperature
-20 - 60°C
Humidity
0–95% RH, Non-condensing
Physical Properties
Housing
Metal
Weight
0.49 kg ( 1.08 lb )
Dimensions (L x W x H)
20.30 x 8.64 x 2.50 cm (7.99 x 3.4 x 0.98 in.)